Publikationen

[221]

Berndt, N.; Böhme, M.; Wagner, M. F.-X.: Multi-gradient structures by cold extrusion of strongly textured continuously cast commercially pure aluminum. Journal of Materials Research and Technology 31, 1355-1366 (2024)

[220]

Gruber, M.; Vitzthum, S.; Norz, R.; Illgen, C.; Gan, W.; Maawad, E.; Hofmann, M.; Böhme, M.; Frint, P.; Wagner, M. F.-X.; Hartmann, C.; Volk, W.: In-situ synchrotron diffraction analysis of deformation mechanisms in an AA5083 sheet metal processed by modified equal-channel angular pressing. Materials Science and Engineering: A 903, 146646 (2024)

[219]

Hirsch, S. J.; Berndt, N.; Grund, T.; Lampke, T.: Combined Effect of Particle Reinforcement and T6 Heat Treatment on the Compressive Deformation Behavior of an A357 Aluminum Alloy at Room Temperature and at 350 °C. Crystals 14, 317 (2024)

[218]

Gruber, M.; Illgen, C.; Lichte, F.; Hartmann, C.; Frint, P.; Wagner, M. F.-X.; Volk, W.: Establishing Equal-Channel Angular Pressing (ECAP) for sheet metals by using backpressure: manufacturing of high-strength aluminum AA5083 sheets. The International Journal of Advanced Manufacturing Technology 127, 3481-3495 (2023)

[217]

Hammer, N.; Ondruschka, B.; Berghold, A.; Kuenzer, T.; Pregartner, G.; Scholze, M.; Schulze-Tanzil, G. G.; Zwirner, J.: Sample size considerations in soft tissue biomechanics. Acta Biomaterialia 169, 168-178 (2023)

[216]

Illgen, C.; Winter, S.; Haase, R.; Böhme, M.; Reiser, N.; Hatscher, A.; Psyk, V.; Kräusel, V.; Wagner, M. F.-X.: Experimental and Numerical Process Design for Press Partitioning of the New Q&P Steel 37SiB6.. Metals 13, 1346 (2023)

[215]

Lünser, K.; Undisz, A.; Wagner, M. F.-X.; Nielsch, K.; Fähler, S.: Solving the puzzle of hierarchical martensitic microstructures in NiTi by (111)-oriented epitaxial films. Materials Today Advances 20, 100441 (2023)

[214]

Małachowska, A.; Kovarik, O.; Sajbura, A.; Sokolowski, P.; Lindner, T.; Scholze, M.; Karlík, M.and Čech, J.; Lampke, T.: Mechanical and fatigue properties of plasma sprayed (Fe_0.9Co_0.1)₇₆Mo₄(P_0.45C_0.2B_0.2Si_0.15)₂₀ and Fe_56.04Co_13.45Nb_5.5B₂₅ metallic glasses. Surface and Coatings Technology 459, 129361 (2023)

[213]

Reuther, F.; Winter, S.; Fritsch, S.; Kräusel, V.; Wagner, M. F.-X.; Psyk, V.: Numerical and Experimental Investigations on Tube Section Flattening for Parameter Identification and Advanced Material Modeling of Tubes. Journal of Manufacturing and Materials Processing 7, 91 (2023)

[212]

Scholze, M.; Wagner, M. F.-X.; Dietrich, D.; Elibol, C.; Fritsch, S.; Illgen, C.; Bohne, B.; Böhme, M.; Colas, D.; Frint, P.: Effect of equal-channel angular pressing on ordering kinetics and twinning in an 18-carat AuCuAg alloy. Journal of Alloys and Compounds 958, 170472 (2023)

[211]

Zwirner, J.; Ondruschka, B.; Scholze, M.; Thambyah, A.; Workman, J.; Hammer, N.; Niestrawska, J. A.: Dynamic load response of human dura mater at different velocities. Journal of the Mechanical Behavior of Biomedical Materials 138, 105617 (2023)

[210]

Berndt, N.; Frint, P.; Böhme, M.; Müller, S.; Wagner, M. F.-X.: On radial microstructural variations, local texture and mechanical gradients after cold extrusion of commercially pure aluminum. Materials Science and Engineering: A 850, 143496 (2022)

[209]

Gruber, M.; Leitner, P.; Auer, M.; Illgen, C.; Frint, P.; Wagner, M. F.-X.; Volk, W.: A Novel Method for the Determination of High Temperature FLCs of ECAP-Processed Aluminum AA5083 Sheet Metal. Key Engineering Materials 926, 1039-1050 (2022)

[208]

Gruber, M.; Spoerer, T.; Illgen, C.; Frint, P.; Wagner, M. F.-X.; Lechner, P.; Volk, W.: Effect of Equal-Channel Angular Pressing and Targeted Heat Treatment on Aluminum AA7075 Sheet Metal. in: Characterization of Minerals, Metals, and Materials 2022, 25-36 (2022)

[207]

Härtel, M.; Illgen, C.; Panzner, T.; Bruder, E.; Schmaltz, S.; van Petegem, S.; Willner, K.; Durst, K.; van Swygenhoven, H.; Wagner, M. F.-X.: Mechanical, microstructural and in-situ neutron diffraction investigations of equi-biaxial Bauschinger effects in an interstitial-free DC06 steel. International Journal of Plasticity 159, 103478 (2022)

[206]

Illgen, C.; Bohne, B.; Wagner, M. F.-X.; Frint, P.: Thermal stability of SPD-processed aluminum alloys - Internal friction as an indication for recovery, recrystallization and abnormal grain growth. Journal of Materials Research and Technology 17, 1752-1759 (2022)

[205]

Pearcy, Q.; Jeejo, M.; Scholze, M.; Tomlinson, J.; Dressler, J.; Zhang, M.; Zwirner: Biomechanics of vascular areas of the human cranial dura mater. Journal of the Mechanical Behavior of Biomedical Materials 12, 104866 (2022)

[204]

Scholze, M.; Safavi, S.; Ramezani, M.; Ondruschka, B.; Hammer, N.: Fatigue Testing of Human Flexor Tendons Using a Customized 3D-Printed Clamping System. Applied Sciences 12, 7836 (2022)

[203]

Steel, S.; Pearcy, Q.; Li, K. C.; Scholze, M.; Zwirner, J.: The relationship between the pH value of a hydration solution and the biomechanical properties of Crosado-embalmed human iliotibial bands. Journal of the Mechanical Behavior of Biomedical Materials 132, 105266 (2022)

[202]

Zwirner, J.; Ondruschka, B.; Pregartner, G.; Berghold, A.; Scholze, M.; Hammer, N.: On the correlations of biomechanical properties of super-imposed temporal tissue layers and their age-, sex-, side- and post-mortem interval dependence. Journal of Biomechanics 130, 110847 (2022)

[201]

Drossel, W.-G.; Bobbert, M.; Böhme, M.; Dammann, C.; Dittes, A.; Gießmann, M.; Hühne, C.; Ihlemann, J.; Kießling, R.; Lampke, T.; Lenz, P.; Mahnken, R.; Meschut, G.; Müller, R.; Nier, M.; Prussak, R.; Riemer, M.; Sander, S.; Schaper, M.; Scharf, I.; Scholze, M.; Schwöbel, S.-D.; Sharafiev, S.; Sinapius, M.; Stefaniak, D.; Tröster, T.; Wagner, M. F.-X.; Wang, Z.; Zinn, C.: Hybridprofile für Trag- und Crashstrukturen. in: Intrinsische Hybridverbunde für Leichtbautragstrukturen, 121-203, ISBN 978-3-662-62832-4 (2021)

[200]

Gruber, M.; Yang, Y.; Illgen, C.; Frint, P.; Wagner, M. F.-X.; Volk, W.: Thermomechanical Analysis and Experimental Validation of ECAP for Aluminum Sheet Metal. in: Forming the Future - Proceedings of the 13th International Conference on the Technology of Plasticity, 1775-1790 (2021)

[199]

Illgen, C.; Bohne, B.; Wagner, M. F.-X.; Gruber, M.; Volk, W.; Frint, P.: Facing the Issues of Sheet Metal Equal-Channel Angular Pressing: A Modified Approach Using Stacks to Produce Ultrafine-Grained High Ductility AA5083 Sheets. Advanced Engineering Materials 23, 2100244 (2021)

[198]

Lorenz, M.; Pelliccia, L.; Werner, M.; Scholze, M.; Klimant, P.; Heyde, C.-E.; Klima, S.; Hammer, N.: Wrist at risk? - Considerations derived from a novel experimental setup to assess torques during hip reaming with potential implications on the orthopedic surgeons' health. Journal of the Mechanical Behavior of Biomedical Materials 113, 104160 (2021)

[197]

Winter, L.; Hockauf, K.; Scholze, M.; Hellmig, R. J.; Lampke, T.: Influence of Pre-Aging on the Artificial Aging Behavior of a 6056 Aluminum Alloy after Conventional Extrusion. Metals 11, 385 (2021)

[196]

Winter, S.; Scholze, M.; Wagner, M. F.-X.: Effect of sample geometry on the macroscopic shear deformation of the titanium alloy Ti-10V-2Fe-3Al subjected to quasi-static and dynamic compression-shear loading. IOP Conference Series: Materials Science and Engineering 1147, 012014 (2021)

[195]

Winter, S.; Werner, M.; Haase, R.; Psyk, V.; Fritsch, S.; Böhme, M.; Wagner, M. F.-X.: Processing Q&P steels by hot-metal gas forming: Influence of local cooling rates on the properties and microstructure of a 3rd generation AHSS. Journal of Materials Processing Technology 293, 117070 (2021)

[194]

Zwirner, J.; Ondruschka, B.; Scholze, M.; Schulze-Tanzil, G.; Hammer, N.: Biomechanical characterization of human temporal muscle fascia in uniaxial tensile tests for graft purposes in duraplasty. Scientific Reports 11, 2127 (2021)

[193]

Zwirner, J.; Ondruschka, B.; Scholze, M.; Workman, J.; Thambyah, A.; Hammer, N.: The dynamic impact behavior of the human neurocranium. Scientific Reports 11, 11331 (2021)

[192]

Zwirner, J.; Safavi, S.; Scholze, M.; Li, K. C.; Waddell, J. N.; Busse, B.; Ondruschka, B.; Hammer, N.: Topographical mapping of the mechanical characteristics of the human neurocranium considering the role of individual layers. Scientific Reports 11, 3721 (2021)

[191]

Bellmann, J.; Lueg-Althoff, J.; Niessen, B.; Böhme, M.; Schumacher, E.; Beyer, E.; Leyens, C.; Tekkaya, A. E.; Groche, P.; Wagner, M. F.-X.; Böhm, S.: Particle Ejection by Jetting and Related Effects in Impact Welding Processes. Metals 10, 1108 (2020)

[190]

Burrow, K.; Young, W.; Hammer, N.; Safavi, S.; Scholze, M.; McConnell, M.; Carne, A.; Barr, D.; Reid, M.; Bekhit, A. E.-D.: The Effect of the Supplementation of a Diet Low in Calcium and Phosphorus with Either Sheep Milk or Cow Milk on the Physical and Mechanical Characteristics of Bone using A Rat Model. Foods 9, 1070 (2020)

[189]

Dieck, S.; Ecke, M.; Rosemann, P.; Fritsch, S.; Wagner, M. F.-X.; Halle, T.: Strength Differential Effect in Martensitic Stainless Steel Under Quenching and Partitioning Heat Treatment Condition. in: Plasticity, Damage and Fracture in Advanced Materials, 35 - 42, ISBN 978-3-030-34850-2 (2020)

[188]

Frohn-Sörensen, P.; Mašek, B.; Wagner, M. F.-X.; Rubešová, K.; Khalaj, O.; Engel, B.: Flexible manufacturing chain with integrated incremental bending and Q-P heat treatment for on-demand production of AHSS safety parts. Journal of Materials Processing Technology 275, 116312 (2020)

[187]

Graf, M.; Fritsch, S.; Awiszus, B.: Determination of Forming Behaviour of EN AW-6060 by Different Testing Methods under Cold Bulk Forming Conditions. Procedia Manufacturing 47, 1512 - 1519 (2020)

[186]

Illgen, C.; Frint, P.; Gruber, M.; Volk, W.; Wagner, M. F.-X.: Evolution of Grain Refinement in AA5083 Sheet Metal Processed by ECAP. in: Light Metals 2020, 362-369, ISBN 978-3-030-36408-3 (2020)

[185]

Mwangi, J. W.; Bui, V. D.; Thüsing, K.; Hahn, S.; Wagner, M. F.-X.; Schubert, A.: Characterization of the arcing phenomenon in micro-EDM and its effect on key mechanical properties of medical-grade Nitinol. Journal of Materials Processing Technology 275, 116334 (2020)

[184]

Niessen, B.; Schumacher, E.; Lueg-Althoff, J.; Bellmann, J.; Böhme, M.; Böhm, S.; Tekkaya, A. E.; Beyer, E.; Leyens, C.; Wagner, M. F.-X.; Groche, P: Interface Formation during Collision Welding of Aluminum. Metals 10, 1202 (2020)

[183]

Perumal, V.; Scholze, M.; Hammer, N.; Woodley, S.; Nicholson, H.: Load-deformation properties of the ligament of the head of femur in situ. Clinical Anatomy 33, 705-713 (2020)

[182]

Rymer, L.-M.; Lindner, T.; Frint, P.; Löbel, M.; Lampke, T.: Designing (Ultra)Fine-Grained High-Entropy Alloys by Spark Plasma Sintering and Equal-Channel Angular Pressing. Crystals 10, 1157 (2020)

[181]

Schmitz, F.; Winter, S.; Clausmeyer, T.; Wagner, M. F.-X.; Tekkaya, A. E.: Adiabatic blanking of advanced high-strength steels. CIRP Annals 69, 269-272 (2020)

[180]

Scholze, M.; Safavi, S.; Li, K. C.; Ondruschka, B.; Werner, M.; Zwirner, J.; Hammer, N.: Standardized tensile testing of soft tissue using a 3D printed clamping system. HardwareX 8, e00159 (2020)

[179]

Wagner, M. F.-X.; Nostitz, N.; Frint, S.; Frint, P.; Ihlemann, J.: Plastic flow during equal-channel angular pressing with arbitrary tool angles. International Journal of Plasticity 134, 102755 (2020)

[178]

Zwirner, J.; Ondruschka, B.; Scholze, M.; Hammer, N.: Passive load-deformation properties of human temporal muscle. Journal of Biomechanics 106, 109829 (2020)

[177]

Zwirner, J.; Ondruschka, B.; Scholze, M.; Hammer, N.: Surface coating and speckling of the human iliotibial tract does not affect its load-deformation properties. Scientific Reports 10, 20747 (2020)

[176]

Zwirner, J.; Ondruschka, B.; Scholze, M.; Schulze-Tanzil, G.; Hammer, N.: Load-deformation characteristics of acellular human scalp: assessing tissue grafts from a material testing perspective. Scientific Reports 10, 19243 (2020)

[175]

Zwirner, J.; Ondruschka, B.; Scholze, M.; Schulze-Tanzil, G.; Hammer, N.: Mechanical properties of native and acellular temporal muscle fascia for surgical reconstruction and computational modelling purposes. Journal of the Mechanical Behavior of Biomedical Materials 108, 103833 (2020)

[174]

Zwirner, J.; Scholze, M.; Ondruschka, B.; Hammer, N.: What Is Considered a Variation of Biomechanical Parameters in Tensile Tests of Collagen-Rich Human Soft Tissues? - Critical Considerations Using the Human Cranial Dura Mater as a Representative Morpho-Mechanic Model. Medicina 56, 520 (2020)

[173]

Böhme, M.; Sharafiev, S.; Schumacher, E.; Böhm, S.; Wagner, M. F. X.: On the microstructure and the origin of intermetallic phase seams in magnetic pulse welding of aluminum and steel. Materialwissenschaft und Werkstofftechnik 50, 958-964 (2019)

[172]

Burrow, K.; Young, W.; Carne, A.; McConnell, M.; Hammer, N.; Scholze, M.; Bekhit, A. E.: Consumption of sheep milk compared to cow milk can affect trabecular bone ultrastructure in a rat model. Food & Function 10, 163-171 (2019)

[171]

Dittrich, F.; Kaars, J.; Masek, B.; Jenicek, S.; Wagner, M. F.-X.; Mayr, P.: HAZ characterization of welded 42SiCr steel treated by quenching and partitioning. Journal of Materials Processing Technology 268, 37-46 (2019)

[170]

Drossel, W.-G.; Lampke, T.; Landgrebe, D.; Wielage, B.; Riedel, F.; Lindner, T.; Mattheß, D.; Scholze, M.; Töberling, G.; Zillmann, B.: Verfahrensansätze für hochpräzise Funktionsflächen. in: Technologiefusion für multifunktionale Leichtbaustrukturen, 217-240, ISBN 978-3-662-54733-5 (2019)

[169]

Drossel, W.-G.; Mehner, J.; Nestler, D.; Wagner, M. F.-X.; Auerswald, C.; Elibol, C.; Helbig, F.; Kolonko, A.; Senf, B.: Funktionale Hybridtextilien mit passiven und aktiven Metall-Monofilamenten. in: Technologiefusion für multifunktionale Leichtbaustrukturen, 265-299, ISBN 978-3-662-54733-5 (2019)

[168]

Frint, P.; Kaiser, T.; Mehner, T.; Bruder, E.; Scholze, M.; Mašek, B.; Lampke, T.; Wagner, M. F.-X.: Strain-rate sensitive ductility in a low-alloy carbon steel after quenching and partitioning treatment. Scientific Reports 9, 17023 (2019)

[167]

Frint, P.; Wagner, M. F.-X.: Strain partitioning by recurrent shear localization during equal-channel angular pressing of an AA6060 aluminum alloy. Acta Materialia 176, 306-317 (2019)

[166]

Gruber, M.; Illgen, C.; Frint, P.; Wagner, M.F.-X.; Volk, W.: Numerical and Experimental Study on ECAP-Processing Parameters for Efficient Grain Refinement of AA5083 Sheet Metal. Key Engineering Materials 794, 315-323 (2019)

[165]

Härtel, M.; Illgen, C.; Bruder, E.; Frint, P.; Wagner, M. F.-X.: Microstructural evolution during uniaxial tension-compression in-plane deformation of an IF steel. Materials Science and Engineering: A 744, 652 - 660 (2019)

[164]

Härtel, S.; Awiszus, B.; Graf, M.; Nitsche, A.; Böhme, M.; Wagner, M. F.-X.; Jirkova, H.; Masek, B.: Influence of Austenite Grain Size on Mechanical Properties after Quench and Partitioning Treatment of a 42SiCr Steel. Metals 9, 577 (2019)

[163]

Hausner, S.; Wagner, M. F.-X.; Wagner, G.: Microstructural Investigations of Low Temperature Joining of Q&P Steels Using Ag Nanoparticles in Combination with Sn and SnAg as Activating Material. Applied Sciences 9, 539 (2019)

[162]

Hockauf, K.; Wagner, M. F.-X.; Mašek, B.; Lampke, T.: Mechanisms of fatigue crack propagation in a Q&P-processed steel. Materials Science and Engineering: A 754, 18 - 28 (2019)

[161]

Johnson, S.; Schultz, M.; Scholze, M.; Smith, T.; Woodfield, J.; Hammer, N.: How much force is required to perforate a colon during colonoscopy? An experimental study. Journal of the Mechanical Behavior of Biomedical Materials 91, 139-148 (2019)

[160]

Lampke, T.; Nestler, D.; Böttger-Hiller, F.; Helbig, F.; Müller, S.; Nickel, D.; Roth-Panke, I.; Ulke-Winter, L.; Buschner, N.; Czech, A.; Hase, K.; Jahn, K.; Kolonko, A.; Schindler, S.; Scholze, M.: Bionisch inspirierte Hybridhalbzeuge. in: Technologiefusion für multifunktionale Leichtbaustrukturen, 93-125, ISBN 978-3-662-54733-5 (2019)

[159]

Lee, J. H. C.; Ondruschka, B.; Falland-Cheung, L.; Scholze, M.; Hammer, N.; Tong, D. C.; Waddell, J. N.: An Investigation on the Correlation between the Mechanical Properties of Human Skull Bone, Its Geometry, Microarchitectural Properties, and Water Content. Journal of Healthcare Engineering 2019, 1-8 (2019)

[158]

Lozano, P. F.; Scholze, M.; Babian, C.; Scheidt, H.; Vielmuth, F.; Waschke, J.; Ondruschka, B.; Hammer, N.: Water-content related alterations in macro and micro scale tendon biomechanics. Scientific Reports 9, (2019)

[157]

Mehner, T.; Scharf, I.; Frint, P.; Schubert, F.; Mašek, B.; Wagner, M.F.-X.; Lampke, T.: Hydrogen embrittlement of a quenching and partitioning steel during corrosion and zinc electroplating. Materials Science and Engineering: A 744, 247-254 (2019)

[156]

Ondruschka, B.; Lee, J. H. C.; Scholze, M.; Zwirner, J.; Tong, D.; Waddell, J. N.; Hammer, N.: A biomechanical comparison between human calvarial bone and a skull simulant considering the role of attached periosteum and dura mater. International Journal of Legal Medicine 133, 1603-1610 (2019)

[155]

Pfeiffer, S.; Fiedler, M.; Bergelt, T.; Kolouch, M.; Putz, M.; Wagner, M. F.-X.: On the correlation of hammer-peened surfaces and process, material and geometry parameters. IOP Conference Series: Materials Science and Engineering 480, 012021 (2019)

[154]

Ramezani, M.; Klima, S.; Le Clerc de la Herverie, P.; Campo, J.; Le Joncour, J.-B.; Rouquette, C.; Scholze, M.; Hammer, N.: In Silico Pelvis and Sacroiliac Joint Motion: Refining a Model of the Human Osteoligamentous Pelvis for Assessing Physiological Load Deformation Using an Inverted Validation Approach. BioMed Research International 2019, 1-12 (2019)

[153]

Wagner, M. F.-X.; Pfeiffer, S.: Prediction of NiTi B19’ Martensite Twin Activation Below a Spherical Indenter Tip. Shape Memory and Superelasticity 5, 313-326 (2019)

[152]

Winter, S.; Pfeiffer, S.; Bergelt, T.; Wagner, M. F.-X.: Finite element simulations on the relation of microstructural characteristics and the formation of different types of adiabatic shear bands in a β-titanium alloy. IOP Conference Series: Materials Science and Engineering 480, 012022 (2019)

[151]

Zwirner, J.; Babian, C.; Ondruschka, B.; Schleifenbaum, S.; Scholze, M.; Waddell, N. J.; Hammer, N.: Tensile properties of the human iliotibial tract depend on height and weight. Medical Engineering & Physics 69, 85-91 publisher = Elsevier BV (2019)

[150]

Zwirner, J.; Ondruschka, B.; Scholze, M.; Schulze-Tanzil, G.; Hammer, N.: Mechanical and morphological description of human acellular dura mater as a scaffold for surgical reconstruction. Journal of the Mechanical Behavior of Biomedical Materials 96, 38-44 (2019)

[149]

Zwirner, J.; Scholze, M.; Ondruschka, B.; Hammer, N.: Tissue Biomechanics of the Human Head Are Altered by Thiel Embalming, Restricting Its Use for Biomechanical Validation. Clinical Anatomy 32 issue = 7 pages = 903 - 913 publisher = Wiley, (2019)

[148]

Zwirner, J.; Scholze, M.; Waddell, J. N.; Ondruschka, B.; Hammer, N.: Mechanical Properties of Human Dura Mater in Tension - An Analysis at an Age Range of 2 to 94 years. Scientific Reports 9, 16655 (2019)

[147]

Böhme, M.; Wagner, M. F.-X.: On the correlation of shear band formation and texture evolution in α-brass during accumulative roll bonding. Scripta Materialia 154, 172-175 (2018)

[146]

Berndt, N.; Frint, P.; Wagner, M. F.-X.: Influence of Extrusion Temperature on the Aging Behavior and Mechanical Properties of an AA6060 Aluminum Alloy. Metals 8, 51 (2018)

[145]

Elibol, C.; Wagner, M. F.-X.: Virtual Extensometer Analysis of Martensite Band Nucleation, Growth, and Strain Softening in Pseudoelastic NiTi Subjected to Different Load Cases. Materials 11, 1458 (2018)

[144]

Falland-Cheung, L.; Scholze, M.; Hammer, N.; Waddell, J. N.; Tong, D. C.; Brunton, P. A.: Elastic behavior of brain simulants in comparison to porcine brain at different loading velocities. Journal of the Mechanical Behavior of Biomedical Materials 77, 609-615 (2018)

[143]

Falland-Cheung, L.; Scholze, M.; Lozano, P. F.; Ondruschka, B.; Tong, D. C.; Brunton, P. A.; Waddell, J. N.; Hammer, N.: Mechanical properties of the human scalp in tension. Journal of the Mechanical Behavior of Biomedical Materials 84, 188-197 (2018)

[142]

Frint, P.; Härtel, M.; Selbmann, R.; Dietrich, D.; Bergmann, M.; Lampke, T.; Landgrebe, D.; Wagner, M. F.-X.: Microstructural Evolution during Severe Plastic Deformation by Gradation Extrusion. Metals 8, 96 (2018)

[141]

Fritsch, S.; Wagner, M. F.-X.: On the Effect of Natural Aging Prior to Low Temperature ECAP of a High-Strength Aluminum Alloy. Metals 8, 63 (2018)

[140]

Graf, M.; Härtel, S.; Bauer, A.; Förster, W.; Bublikova, D.; Wagner, M. F.-X.; Awiszus, B.; Masek, B.: Development of a Quenching-Partitioning Process Chain for Forging Components. Materials Science Forum 918, 85 - 92 (2018)

[139]

Härtel, M.; Frint, P.; Abstoss, K. G.; Wagner, M.F.-X.: Effect of Creep and Aging on the Precipitation Kinetics of an Al-Cu Alloy after One Pass of ECAP. Advanced Engineering Materials 20, 1700307 (2018)

[138]

Härtel, M.; Illgen, C.; Frint, P.; Wagner, M. F.-X.: On the PLC Effect in a Particle Reinforced AA2017 Alloy. Metals 8, 88 (2018)

[137]

Härtel, M.; Pfeiffer, S.; Schmaltz, S.; Söhngen, B.; Kulawinski, D.; Willner, K.; Henkel, S.; Biermann, H.; Wagner, M. F.-X.: On the identification of an effective cross section for a cruciform specimen. Strain 54, e12257 (2018)

[136]

Habisch, S.; Böhme, M.; Peter, S.; Grund, T.; Mayr, P.: The Effect of Interlayer Materials on the Joint Properties of Diffusion-Bonded Aluminium and Magnesium. Metals 8, 138 (2018)

[135]

Hammer, N.; Scholze, M.; Kibsg ård, T.; Klima, S.; Schleifenbaum, S.; Seidel, T.; Werner, M.; Grunert, R.: Physiological in~vitro sacroiliac joint motion: a study on three-dimensional posterior pelvic ring kinematics. Journal of Anatomy 234, 346-358 (2018)

[134]

Horn, T. D.; Silbermann, C. B.; Frint, P.; Wagner, M. F.-X.; Ihlemann, J.: Strain Localization during Equal-Channel Angular Pressing Analyzed by Finite Element Simulations. Metals 8, 55 (2018)

[133]

Jirková, H.; Opatová, K.; Wagner, M. F.-X.; Mašek, B.: Physical Simulation of Press Hardening of TRIP Steel. in: Proceedings of the International Conference on Martensitic Transformations: Chicago, 135-141 (2018)

[132]

Kießling, R.; Ihlemann, J.; Riemer, M.; Drossel, W.-G.; Dittes, A.; Scharf, I.; Lampke, T.; Sharafiev, S.; Pouya, M.; Wagner, M. F.-X.: A process and load adjusted coating system for metallic inserts in hybrid composites. Production Engineering 12, 249-257 (2018)

[131]

Klima, S.; Grunert, R.; Ondruschka, B.; Scholze, M.; Seidel, T.; Werner, M.; Hammer, N.: Pelvic orthosis effects on posterior pelvis kinematics An in-vitro biomechanical study. Scientific Reports 8, (2018)

[130]

Lindner, T.; Saborowski, E.; Scholze, M.; Zillmann, B.; Lampke, T.: Thermal Spray Coatings as an Adhesion Promoter in Metal/FRP Joints. Metals 8, 769 (2018)

[129]

Mehner, T.; Morgenstern, R.; Frint, P.; Scharf, I.; Wagner, M. F.-X.; Lampke, T.: Corrosion characteristics of a quenching and partitioning steel determined by electrochemical impedance spectroscopy. IOP Conference Series: Materials Science and Engineering 373, 012003 (2018)

[128]

Pouya, M.; Balasubramaniam, S.; Sharafiev, S.; Wagner, M. F.-X.: Dynamic behavior of geometrically complex hybrid composite samples in a Split-Hopkinson Pressure Bar system. IOP Conference Series: Materials Science and Engineering 373, 012025 (2018)

[127]

Scherzer, R.; Fritsch, S.; Landgraf, R.; Ihlemann, J.; Wagner, M. F.-X.: Finite Element Simulation of the Presta Joining Process for Assembled Camshafts: Application to Aluminum Shafts. Metals 8, 128 (2018)

[126]

Scholze, M.; Singh, A.; Lozano, P. F.; Ondruschka, B.; Ramezani, M.; Werner, M.; Hammer, N.: Utilization of 3D printing technology to facilitate and standardize soft tissue testing. Scientific Reports 8, (2018)

[125]

Singh, A.; Scholze, M.; Hammer, N.: On the influence of surface coating on tissue biomechanics – effects on rat bones under routine conditions with implications for image-based deformation detection. BMC Musculoskeletal Disorders 19, (2018)

[124]

Stewart, R.; Kieser, D. C.; Scholze, M.; Hammer, N.; Stone, B.; Hooper, G.: Preliminary biomechanical results of a novel pin configuration for external fixation of vertical shear pelvic fractures. ANZ Journal of Surgery 88, 1051-1055 (2018)

[123]

Wagner, M. F.-X.: Light-Weight Aluminum-Based Alloys - From Fundamental Science to Engineering Applications. Metals 8, 260 (2018)

[122]

Zeidler, H.; Klemm, D.; Böttger-Hiller, F.; Fritsch, S.; Guen, M. J. L.; Singamneni, S.: 3D printing of biodegradable parts using renewable biobased materials. Procedia Manufacturing 21, 117-124 (2018)

[121]

Schmitz, F.; Winter, S.; Clausmeyer, T.; Even, D.; Colasse, C.; Tekkaya, E.A.; Wagner, M.F.-X.: Materials science-based simulation strategies for the adiabatic cutting process. in: Proc. of the 5th International Conference on Steels in Cars and Trucks, (2017)

[120]

Berndt, N.; Frint, P.; Böhme, M.; Wagner, M.F.-X.: Microstructure and mechanical properties of an AA6060 aluminum alloy after cold and warm extrusion. Materials Science and Engineering: A 707, 717 - 724 (2017)

[119]

Frint, P.; Wagner, M.F.-X.; Weber, S.; Seipp, S.; Frint, S.; Lampke, T.: An experimental study on optimum lubrication for large-scale severe plastic deformation of aluminum-based alloys. Journal of Materials Processing Technology 239, 222-229 (2017)

[118]

Härtel, M.; Bohne, B.; Wagner, M.F.-X.: Microstructural evolution during tension-compression in-plane deformation of a pure aluminum sheet. IOP Conference Series: Materials Science and Engineering 181, 012024 (2017)

[117]

Hahn, S.; Schulze, A.; Böhme, M.; Hahn, T.; Wagner, M. F.-X.: Thin NiTi Films Deposited on Graphene Substrates. Shape Memory and Superelasticity 3, 1-8 (2017)

[116]

Herold, F.; Schmidt, A.; Frint, P.; Götze, U.; Wagner, M. F.-X.: Technical-economic evaluation of severe plastic deformation processing technologies — methodology and use case of lever-arm-shaped aircraft lightweight components. The International Journal of Advanced Manufacturing Technology 94, 3619-3632 (2017)

[115]

Kauffmann-Weiss, S.; Hahn, S.; Weigelt, C.; Schultz, L.; Wagner, M.F.-X.; Fähler, S.: Growth, microstructure and thermal transformation behaviour of epitaxial Ni-Ti films. Acta Materialia 132, 255-263 (2017)

[114]

Pfeiffer, S.; Frint, P.; Wagner, M.F.-X.: Analysis of the complex stress state during early loading in cylindrical compression-shear specimens. IOP Conference Series: Materials Science and Engineering 181, 012025 (2017)

[113]

Pfeiffer, S.; Wagner, M.F.-X.: Elastic deformation of twinned microstructures. Proceedings of the Royal Society of London A: Mathematical, Physical and Engineering Sciences 473, 20170330 (2017)

[112]

Pouya, M.; Winter, S.; Fritsch, S.; Wagner, M.F.-X.: A numerical and experimental study of temperature effects on deformation behavior of carbon steels at high strain rates. IOP Conference Series: Materials Science and Engineering 181, 012022 (2017)

[111]

R. Kießling; J. Ihlemann; M. Riemer; W.-G. Drossel; I. Scharf; T. Lampke; S. Sharafiev; M. Pouya; M.F.-X. Wagner: The Interface of an Intrinsic Hybrid Composite - Development, Production and Characterisation. Procedia CIRP 66, 289 - 293 (2017)

[110]

Sen, I.; Roy, S.; Wagner, M.F.-X.: Indentation Response and Structure-Property Correlation in a Bimodal Ti-6Al-4V Alloy. Advanced Engineering Materials 19, 1700298 (2017)

[109]

Wagner, S.; Härtel, M.; Frint, P.; Wagner, M.F.-X.: Influence of ECAP temperature on the formability of a particle reinforced 2017 aluminum alloy. IOP Conference Series: Materials Science and Engineering 181, 012039 (2017)

[108]

Winter, S.; Schmitz, F.; Clausmeyer, T.; Tekkaya, A. E.; Wagner, M.F.-X.: High temperature and dynamic testing of AHSS for an analytical description of the adiabatic cutting process. IOP Conference Series: Materials Science and Engineering 181, 012026 (2017)

[107]

Frint, S.; Hockauf, M.; Frint, P.; Wagner, M. F.-X.: Scaling up Segal's principle of Equal-Channel Angular Pressing. Materials & Design 97, 502-511 (2016)

[106]

Fritsch, S.; Scholze, M.; Wagner, M. F.-X.: Influence of thermally activated processes on the deformation behavior during low temperature ECAP. IOP Conf. Ser.: Mater. Sci. Eng. 118, 012030 (2016)

[105]

Härtel, M.; Illgen, C.; Wagner, M. F.-X.: Experimental evaluation of Bauschinger effects during tension-compression in-plane deformation of sheet materials. IOP Conf. Ser.: Mater. Sci. Eng. 118, 012018 (2016)

[104]

Hahn, S.; Wagner, M. F.-X.: Challenges During Microstructural Analysis and Mechanical Testing of Small-Scale Pseudoelastic NiTi Structures. Shape Memory and Superelasticity 2, 171-179 (2016)

[103]

Kießling, R.; Ihlemann, J.; Riemer, M.; Drossel, W.-G.; Scharf, I.; Lampke, T.; Sharafiev, S.; Pouya, M.; Wagner, M. F.-X.: On the development of an intrinsic hybrid composite. IOP Conf. Ser.: Mater. Sci. Eng. 118, 012017 (2016)

[102]

Lampke, T.; Wagner, G.; Wagner, M. F.-X.: Preface. IOP Conf. Ser.: Mater. Sci. Eng. 118, 011001 (2016)

[101]

Masek, B.; Jirkova, H.; Kucerova, L.; Wagner, M. F.-X.: Obtaining a TRIP microstructure by thermomechanical treatment without isothermal holding. IOP Conf. Ser.: Mater. Sci. Eng. 118, 012024 (2016)

[100]

Niemann, R.; Hahn, S.; Diestel, A.; Backen, A.; Schultz, L.; Nielsch, K.; Wagner, M. F.-X.; Fähler, S.: Reducing the nucleation barrier in magnetocaloric Heusler alloys by nanoindentation. APL Mater. 4, 064101 (2016)

[99]

Sanli, A.; Müller, C.; Kanoun, O.; Elibol, C.; Wagner, M.F.-X.: Piezoresistive Characterization of Multi-walled Carbon Nanotube-Epoxy based Flexible Strain Sensitive Films by Impedance Spectroscopy. Composites Science and Technology 122, 18-26 (2016)

[98]

Schleifenbaum, S.; Prietzel, T.; Aust, G.; Boldt, A.; Fritsch, S.; Keil, I.; Koch, H.; Möbius, R.; Scheidt, H. A.; Wagner, M. F.-X.; Hammer, N.: Acellularization-Induced Changes in Tensile Properties Are Organ Specific - An In-Vitro Mechanical and Structural Analysis of Porcine Soft Tissues. PLOS ONE 11, e0151223 (2016)

[97]

Sharafiev, S.; Pabst, C.; Wagner, M. F.-X.; Groche, P.: Microstructural characterisation of interfaces in magnetic pulse welded aluminum/aluminum joints. IOP Conf. Ser.: Mater. Sci. Eng. 118, 012016 (2016)

[96]

Winter, S.; Wagner, M. F.-X.: On the effect of incremental forming on alpha phase precipitation and mechanical behavior of beta-Ti-10V-2Fe-3Al. IOP Conf. Ser.: Mater. Sci. Eng. 118, 012026 (2016)

[95]

Mašek, B.; Jirková, H.; Aišman, D.; Wagner, M.F.-X.: New Manufacturing Processes for Products from Ultra High Strength Steels. in: Proc. of the 5th International Conference on Accuracy in Forming Technology, 493 (2015)

[94]

Senf, B.; Bucht, A.; Drossel, W.-G.; Elibol, C.; Wagner, M.F.-X.: Characterization of shape memory alloy wires integrated into lightweight structures. in: Proc. of the 2nd International MERGE Technologies Conference, 181-188 (2015)

[93]

Vorel, I.; Rubešová, K.; Khalaj, O. ; Opatová, K.; M.F.-X. Wagner: Analysis of Laser Welds on Steel Processed by Q-P Process. in: Proceedings of The Fourth International Conference On Advances in Mechanical, Aeronautical and Production Techniques - MAPT 2015, 29 - 32 (2015)

[92]

Elibol, C.; Wagner, M.F.-X.: Investigation of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression-shear. Materials Science and Engineering: A 621, 76-81 (2015)

[91]

Elibol, C.; Wagner, M.F.-X.: Strain rate effects on the localization of the stress-induced martensitic transformation in pseudoelastic NiTi under uniaxial tension, compression and compression-shear. Materials Science and Engineering: A 643, 194-202 (2015)

[90]

Mašek, B.; Vančura, F.; Aišman, D.; Jirková, H.; Wagner, M.F.-X.: Effect of Input Structure of Blank on Development of Final Structure when Processing at Temperatures between Solidus and Liquidus. Procedia Engineering 100, 722-729 (2015)

[89]

Sichting, F.; Steinke, H.; Wagner, M.F.-X.; Fritsch, S.; Hädrich, C.; Hammer, N.: Quantification of material slippage in the iliotibial tract when applying the partial plastination clamping technique. Journal of the Mechanical Behavior of Biomedical Materials 49, 112-117 (2015)

[88]

Zillmann, B.; Wagner, M.F.-X.; Schmaltz, S.; Schmidl, E.; Lampke, T.; Willner, K.; Halle, T.: In-plane biaxial compression and tension testing of thin sheet materials. International Journal of Solids and Structures 66, 111-120 (2015)

[87]

Niemann, R.; Diestel, A.; Backen, A.; Roessler, U.K.; Behler, C.; Hahn, S.; Wagner, M.F.-X.; Schultz, L.; Faehler, S.: Controlling reversibility of the magneto-structural transition in first-order materials on the micro scale. in: Proc. 6th International Conference on Magnetic Refrigeration at Room Temperature (Thermag VI), (2014)

[86]

Senf, B.; Bucht, A.; Drossel, W.-G.; Auerswald, C.; Schaufuß, J.; Mehner, J.; Elibol, C.; Wagner, M.F.-X.; Brisa, V.J.D.; Schindler, S.; Helbig, F.: Adaptive Verbundbauteile aus faserverstärktem Kunststoff und Formgedächtnislegierung. in: Mehrwert durch Textiltechnik : Tagungsband zur 14. Chemnitzer Textiltechnik-Tagung, 78-85 (2014)

[85]

Berndt, C.; Elibol, C.; Drebenstedt, C.; Drossel, W.-G.; Kroll, L.; Wagner, M.F.-X.: Gradierte Metallstrukturen mit Kunststoffanbindungen. Lightweight Design 7, 26-31 (2014)

[84]

Groche, P.; Wagner, M.F.-X.; Pabst, C.; Sharafiev, S.: Development of a novel test rig to investigate the fundamentals of impact welding. Journal of Materials Processing Technology 214, 2009-2017 (2014)

[83]

Härtel, M.; Wagner, S.; Frint, P.; Wagner, M.F.-X.: Effects of particle reinforcement and ECAP on the precipitation kinetics of an Al-Cu alloy. IOP Conference Series: Materials Science and Engineering 63, 012080 (2014)

[82]

Hammer, N.; Huster, D.; Fritsch, S.; Hädrich, C.; Koch, H.; Schmidt, P.; Sichting, F.; Wagner, M.F.-X.; Boldt, A.: Do Cells Contribute to Tendon and Ligament Biomechanics?. PLoS ONE 9, e105037 (2014)

[81]

Hockauf, K.; Wagner, M.F.-X.; Halle, T.; Niendorf, T.; Hockauf, M.; Lampke, T.: Influence of precipitates on low-cycle fatigue and crack growth behavior in an ultrafine-grained aluminum alloy. Acta Materialia 80, 250-263 (2014)

[80]

Pabst, C.; Sharafiev, S.; Groche, P.; Wagner, M.F.-X.: A Novel Method to Investigate the Principles of Impact Welding: Development and Enhancement of a Test Rig, Experimental and Numerical Results. Advanced Materials Research 966-967, 500-509 (2014)

[79]

Vančura, F.; Mašek, B.; Aišman, D.; Jirková, H.; Wagner, M.F.-X.; Böhme, M.: Modification of metastable microstructure of CPM15V steel by heat exposure after treatment in semi-solid state. Journal of Alloys and Compounds 586, 159-164 (2014)

[78]

Yin, Q.; Zillmann, B.; Suttner, S.; Gerstein, G.; Biasutti, M.; Tekkaya, A.E.; Wagner, M.F.-X.; Merklein, M.; Schaper, M.; Halle, T.; Brosius, A.: An experimental and numerical investigation of different shear test configurations for sheet metal characterization. International Journal of Solids and Structures 51, 1066-1074 (2014)

[77]

Böhme, M.; Hahn, S.; Nickel, D.; Wagner, M.F.-X.: Dehnungsmessung in Verbundwerkstoffen mit Hilfe von Formgedächtnislegierungen. in: Proc. Werkstofftechnisches Kolloquium, 282-290 (2013)

[76]

Hahn, S.; Böhme, M.; Trautmann, M.; Nickel, D.; Wagner, M.F.-X.: Untersuchungen zur NiTi-Dünnschichtabscheidung auf Kohlenstofffasern unter Einsatz einer metallischen Zwischenschicht. in: Proc. Werkstofftechnisches Kolloquium, 262-266 (2013)

[75]

Pouya, M.; Halle, T.; Böhme, M.; Elibol, C.; Nickel, D.; Lampke, T.; Wagner, M.F.-X.: Finite element analysis of localized versus homogeneous transformation in pseudoelastic NiTi wires and coatings. in: Proc. Werkstofftechnisches Kolloquium, 291-297 (2013)

[74]

Jirková, H.; Aišman, D.; Sen, I.; Wagner, M.F.-X.; Behúlová, M.; Kusý, M.; Mašek, B.: Mini-Thixoforming of a Steel Produced by Powder Metallurgy. Solid State Phenomena 192-193, 500-505 (2013)

[73]

Jirková, H.; Mašek, B.; Wagner, M.F.-X.; Langmajerová, D.; Kučerová, L.; Treml, R.; Kiener, D.: Influence of metastable retained austenite on macro and micromechanical properties of steel processed by the Q&P process. Journal of Alloys and Compounds 615, S163-S168 (2013)

[72]

Pfetzing-Micklich, J.; Somsen, C.; Dlouhy, A.; Begau, C.; Hartmaier, A.; Wagner, M.F.-X.; Eggeler, G.: On the crystallographic anisotropy of nanoindentation in pseudoelastic NiTi. Acta Materialia 61, 602-616 (2013)

[71]

Zillmann, B.; Clausmeyer, T.; Bargmann, S.; Lampke, T.; Wagner, M.F.-X.; Halle, T.: Validation of Simple Shear Tests for Parameter Identification Considering the Evolution of Plastic Anisotropy. Technische Mechanik 32, 622-630 (2012)

[70]

Frint, P.; Hockauf, M.; Halle, T.; Wagner, M.F.-X.; Lampke, T.: The role of backpressure during large scale Equal-Channel Angular Pressing. Materialwissenschaft Und Werkstofftechnik 43, 668-672 (2012)

[69]

Fritsch, S.; Scholze, M.; Wagner, M.F.-X.: Cryogenic forming of AA7075 by equal-channel angular pressing. Materialwissenschaft und Werkstofftechnik 43, 561-566 (2012)

[68]

Hockauf, K.; Hockauf, M.; Wagner, M.F.-X.; Lampke, T.; Halle, T.: Fatigue crack propagation in an ECAP-processed aluminium alloy - Influence of shear plane orientation. Materialwissenschaft und Werkstofftechnik 43, 609-616 (2012)

[67]

Hockauf, M.; Wagner, M.F.-X.; Händel, M.; Lampke, T.; Siebeck, S.; Wielage, B.: High-strength aluminum-based light-weight materials for safety components - recent progress by microstructural refinement and particle reinforcement. International Journal of Materials Research 103, 3-11 (2012)

[66]

Seipp, S.; Wagner, M.F.-X.; Hockauf, K.; Schneider, I.; Meyer, L.W.; Hockauf, M.: Microstructure, crystallographic texture and mechanical properties of the magnesium alloy AZ31B after different routes of thermo-mechanical processing. International Journal of Plasticity 35, 155-166 (2012)

[65]

Sen, I.; Jirková, H.; Mašek, B.; Böhme, M.; Wagner, M.F.-X.: Microstructure and Mechanical Behavior of a Mini-Thixoformed Tool Steel. Metallurgical and Materials Transactions A 43, 3034-3038 (2012)

[64]

Wagner, S.; Siebeck, S.; Hockauf, M.; Nestler, D.; Podlesak, H.; Wielage, B.; Wagner, M.F.-X.: Effect of SiC-reinforcement and equal-channel angular pressing on microstructure and mechanical properties of AA2017. Advanced Engineering Materials 14, 388-393 (2012)

[63]

Winter, S.; Fritsch, S.; Wagner, M.F.-X.: Microstructural evolution and mechanical properties of β-titanium Ti-10V-2Fe-3Al during incremental forming. in: Proc. TMS 2012 - volume 1: Materials Processing and Interfaces, 833-840 (2012)

[62]

Wagner, M.F.-X.; Zwierlein, C.; Schmidt, K.P.: Vorwort. in: Perspektiven - Forschungsfragen der Zukunft, 7-11, ISBN 978-3-506-77180-3 (2011)

[61]

Zillmann, B.; Härtel, M.; Halle, T.; Lampke, T.; Wagner, M.F.-X.: Flow Behavior of Automotive Aluminum Sheets During In-Plane Uniaxial and Biaxial Compression Loading. in: Proc. of the 10th International Conference on Technology of Plasticity, 691-695 (2011)

[60]

Frint, P.; Hockauf, M.; Dietrich, D.; Halle, T.; Wagner, M.F.-X.; Lampke, T.: Influence of strain gradients on the grain refinement during industrial scale ECAP. Materialwissenschaft und Werkstofftechnik 42, 680-685 (2011)

[59]

Fritsch, S.; Hunger, S.; Scholze, M.; Hockauf, M.; Wagner, M.F.-X.: Optimisation of thermo mechanical treatments using cryogenic rolling and aging of the high strength aluminium alloy AlZn5.5MgCu (AA7075). Materialwissenschaft und Werkstofftechnik 42, 573-579 (2011)

[58]

Klärner, M.; Bayreuther, V.; Kuprin, C.; Czech, A.; Kausch, M.; Kroll, L.; Wielage, B.; Nestler, D.; Wagner, M.F.-X.: Ressourcenschonende Verbundstrukturen und Technologien durch Ultraleichtbau. in: Energieeffiziente Produkt- und Prozessinnovationen in der Produktionstechnik - 1. Internationales Kolloquium des Spitzentechnologieclusters eniPROD, 325-348 (2010)

[57]

Frenzel, J.; George, E.P.; Dlouhy, A.; Somsen, C.; Wagner, M.F.-X.; Eggeler, G.: Influence of Ni on martensitic phase transformations in NiTi shape memory alloys. Acta Materialia 58, 3444-3458 (2010)

[56]

Frint, P.; Halle, T.; Wagner, M.F.-X.; Hockauf, M.; Lampke, T.: Erfassung von Effekten beim Skalieren von ECAP am Beispiel einer 6000er Aluminiumlegierung. Materialwissenschaft und Werkstofftechnik 41, 814-821 (2010)

[55]

Frint, P.; Hockauf, M.; Halle, T.; Strehl, G.; Lampke, T.; Wagner, M.F.-X.: Microstructural Features and Mechanical Properties after Industrial Scale ECAP of an Al 6060 Alloy. Material Science Forum 667-669, 1153-1158 (2010)

[54]

Fritsch, S.; Hockauf, M.; Schönherr, R.; Hunger, S.; Meyer, L.W.; Wagner, M.F.-X.: Untersuchungen zum Einfluss von ECAP und Tieftemperaturwalzen auf die mechanischen Eigenschaften der Aluminiumlegierung 7075. Materialwissenschaft und Werkstofftechnik 41, 697-703 (2010)

[53]

Großmann, C.; Schaefer, A.; Wagner, M.F.-X.: A finite element study on localized deformation and functional fatigue in pseudoelastic NiTi strips. Materials Science and Engineering: A 527, 1172-1178 (2010)

[52]

Hockauf, K.; Halle, T.; Hockauf, M.; Meyer, L.W.; Wagner, M.F.-X.; Lampke, T.: Thermomechanische Optimierung mittels ECAP und Wärmebehandlung an einer Aluminiumlegierung der Automobil- und Luftfahrtindustrie. Materialwissenschaft und Werkstofftechnik 41, 756-764 (2010)

[51]

Hockauf, K.; Halle, T.; Hockauf, M.; Wagner, M.F.-X.; Lampke, T.: Near-Threshold Fatigue Crack Propagation in an ECAP-Processed Ultrafine-Grained Aluminium Alloy. Materials Science Forum 667-669, 873-878 (2010)

[50]

Peter, D.; Eggeler, G.; Wagner, M.F.-X.: Microstructural Characterization of Lamellar Features in TiAl by FIB Imaging. Advanced Engineering Materials 12, 447-452 (2010)

[49]

Pfetzing-Micklich, J.; Wagner, M.F.-X.; Zarnetta, R.; Frenzel, J.; Eggeler, G.; Markaki, A.E.; Wheeler, J.; Clyne, T.W.: Nanoindentation of a Pseudoelastic NiTiFe Shape Memory Alloy. Advanced Engineering Materials 12, 13-19 (2010)

[48]

Schaefer, A.; Wagner, M.F.-X.; Pelegrina, J.L.; Olbricht, J.; Eggeler, G.: Localization Events and Microstructural Evolution in Ultra-Fine Grained NiTi Shape Memory Alloys during Thermo-Mechanical Loading. Advanced Engineering Materials 12, 453-459 (2010)

[47]

Shutov, A.V.V.; Kuprin, C.; Ihlemann, J.; Wagner, M.F.-X.; Silbermann, C.: Experimentelle Untersuchung und numerische Simulation des inkrementellen Umformverhaltens von Stahl 42CrMo4. Materialwissenschaft und Werkstofftechnik 41, 765-775 (2010)

[46]

Wagner, M.F.-X.: Microstructural and mechanical challenges in biomedical NiTi. J. Phys.: Conf. Ser. 240, 12004 (2010)

[45]

Wagner, M.F.-X.; Dey, S.R.R.; Gugel, H.; Frenzel, J.; Somsen, C.; Eggeler, G.: Effect of low-temperature precipitation on the transformation characteristics of Ni-rich NiTi shape memory alloys during thermal cycling. Intermetallics 18, 1172-1179 (2010)

[44]

Wagner, M.F.-X.; Schaefer, A.: Macroscopic versus local strain rates during tensile testing of pseudoelastic NiTi. Scripta Materialia 63, 863-866 (2010)

[43]

Wagner, S.; Podlesak, H.; Siebeck, S.; Nestler, D.; Wagner, M.F.-X.; Wielage, B.; Hockauf, M.: Einfluss von ECAP und Wärmebehandlung auf Mikrostruktur und mechanische Eigenschaften einer SiC-verstärkten AlCu-Legierung. Materialwissenschaft und Werkstofftechnik 41, 704-710 (2010)

[42]

Young, M.L.; Wagner, M.F.-X.; Frenzel, J.; Schmahl, W.W.; Eggeler, G.: Phase volume fractions and strain measurements in an ultrafine-grained NiTi shape-memory alloy during tensile loading. Acta Materialia 58, 2344-2354 (2010)

[41]

Zhou, N.; Shen, C.; Wagner, M.F.-X.; Eggeler, G.; Mills, M.J.; Wang, Y.: Effect of Ni₄Ti₃ precipitation on martensitic transformation in Ti-Ni. Acta Materialia 58, 6685-6694 (2010)

[40]

Wagner, M.F.-X.: Versprechen von Forschung und Technik - Selbstdarstellung und gesellschaftliche Wahrnehmung. in: Designer-Baby. Diagnostik und Forschung am ungeborenen Leben, 103-113, ISBN 978-3-506-76694-6 (2009)

[39]

Heinen, R.; Hackl, K.; Windl, W.; Wagner, M.F.-X.: Microstructural evolution during multiaxial deformation of pseudoelastic NiTi studied by first-principles-based micromechanical modeling. Acta Materialia 57, 3856-3867 (2009)

[38]

Norfleet, D.M.; Sarosi, P.M.; Manchiraju, S.; Wagner, M.F.-X.; Uchic, M.D.; Anderson, P.M.; Mills, M.J.: Transformation-induced plasticity during pseudoelastic deformation in Ni-Ti microcrystals. Acta Materialia 57, 3549-3561 (2009)

[37]

Peter, D.; Pfetzing, J.; Wagner, M.F.-X.; Eggeler, G.: Microstructural anisotropy, uniaxial and biaxial creep behavior of Ti-45Al-5Nb-0.2B-0.2C. Materials Science and Engineering A 510-511, 368-372 (2009)

[36]

Peter, D.; Viswanathan, G.B.; Wagner, M.F.-X.; Eggeler, G.: Grain-boundary sliding in a TiAl alloy with fine-grained duplex microstructure during 750 °C creep. Materials Science and Engineering A 510-511, 359-363 (2009)

[35]

Pfetzing, J.; Schaefer, A.; Somsen, C.; Wagner, M.F.-X.: Nanoindentation of pseudoelastic NiTi shape memory alloys: Thermomechanical and microstructural aspects. International Journal of Materials Research 100, 936-942 (2009)

[34]

Pfetzing, J.; Wagner, M.F.-X.; Simon, T.; Schaefer, A.; Somsen, C.; Eggeler, G.: TEM investigation of the microstructural evolution during nanoindentation of NiTi. in: Proc. of ESOMAT 2009, 1-7 (2009)

[33]

Schaefer, A.; Wagner, M.F.-X.: Strain mapping at propagating interfaces in pseudoelastic NiTi. in: Proc. of ESOMAT 2009, 1-6 (2009)

[32]

Wagner, M.F.-X.; Windl, W.: Elastic anisotropy of Ni₄Ti₃ from first principles. Scripta Materialia 60, 207-210 (2009)

[31]

Peter, D.; Wagner, M.F.-X.; Eggeler, G.: Mikrostruktur und Kriechen einer stranggepressten TiAl-Legierung. Praktische Metallographie (Sonderband) 40, 317-322 (2008)

[30]

Großmann, C.; Schäfer, A.; Wagner, M.F.-X.: Finite element simulation of localized phase transformations in pseudoelastic NiTi shape memory alloys subjected to multi-axial stress states. in: Proc. of ICOMAT 2008, 525-530 (2008)

[29]

Hasan, M.; Schmahl, W.W.; Hackl, K.; Heinen, R.; Frenzel, J.; Gollerthan, S.; Eggeler, G.; Wagner, M.; Khalil-Allafi, J.; Baruj, A.: Hard X-ray studies of stress-induced phase transformations of superelastic NiTi shape memory alloys under uniaxial load. Materials Science and Engineering: A 481-482, 414-419 (2008)

[28]

Mentz, J.; Frenzel, J.; Wagner, M.F.-X.; Neuking, K.; Eggeler, G.; Buchkremer, H.P.; Stöver, D.: Powder metallurgical processing of NiTi shape memory alloys with elevated transformation temperatures. Materials Science and Engineering: A 491, 270-278 (2008)

[27]

Olbricht, J.; Wagner, M.F.-X.; Condó, A.; Dlouhy, A.; Groß mann, C.; Kröger, A.; Somsen, C.; Eggeler, G.: A transmission electron microscopy procedure for in-situ straining of miniature pseudoelastic NiTi specimens. International Journal of Materials Research 99, 1150-1156 (2008)

[26]

Peter, D.; Pfetzing, J.; Wagner, M.F.-X.; Somsen, C.; Pesicka, J.; Skrotzki, B.; Eggeler, G.: Quantitative Charakterisierung der Gefüge-Anisotropie einer stranggepressten TiAl-Legierung. Practical Metallography 45, 210-224 (2008)

[25]

Pfetzing, J.; Wagner, M.F.-X.; Frenzel, J.; Somsen, C.; Eggeler, G.: Thermomechanical constraints on pseudoelasticity during nanoindentation of binary and ternary NiTi(Fe) alloys. in: Proc. of ICOMAT 2008, 639-644 (2008)

[24]

Pfetzing, J.; Wagner, M.F.-X.; Zarnetta, R.; Tak, K.-G.; Eggeler, G.: Untersuchungen zum Einfluss der Kornorientierung auf Nanoindentation-Messungen an Reineisen. Practical Metallography 46, 63-76 (2008)

[23]

Schäfer, A .; Olbricht, J.; Wagner, M.F.-X.: Monitoring localized deformation of pseudoelastic NiTi subjected to uniaxial loading. in: Proc. of ICOMAT 2008, 537-542 (2008)

[22]

Wagner, M.F.-X.; Nayan, N.; Ramamurty, U.: Healing of fatigue damage in NiTi shape memory alloys. Journal of Physics D: Applied Physics 41, 185408 (2008)

[21]

Wagner, M.F.-X.; Windl, W.: Lattice stability, elastic constants and macroscopic moduli of NiTi martensites from first principles. Acta Materialia 56, 6232-6245 (2008)

[20]

Frotscher, M.; Burow, J.; Wagner, M.F.-X.; Neuking, K.; Eggeler, G.; Schön, P.; Böckmann, R.: Thermo-mechanical processing, microstructure and bending rotation fatigue of ultra-fine grained NiTiCr-wires. in: Proc. of SMST 2007, 149-157 (2007)

[19]

Olbricht, J.; Schäfer, A.; Wagner, M.F.-X.; Eggeler, G.: Characterization of transformation localization during pseudoelastic cycling of NiTi. in: Proc. of SMST 2007, 47-54 (2007)

[18]

Wagner, M.; Frenzel, J.; Eggeler, G.: Localization of Deformation During Pseudo Elastic Cycling of Ultra Fine Grained NiTi Shape Memory Wires. in: Proc. of FATIGUE 2006, FT196 (auf CD) (2006)

[17]

Humburg, M.; Eggeler, G.; Wagner, M.: Thermo-Kombiventil - Thermomanagement im Standheizbetrieb. ATZ - Automobiltechnische Zeitschrift 108, 196-203 (2006)

[16]

Wagner, M.; Eggeler, G.: Multiple stress plateaus during complex mechanical cycling of pseudo elastic NiTi wires. in: Proc. of SMST 2006, 579-587 (2006)

[15]

Wagner, M.F.-X.; Eggeler, G.: New aspects of bending rotation fatigue in ultra-fine-grained pseudo-elastic NiTi wires. International Journal of Materials Research 97, 1687-1696 (2006)

[14]

Wagner, M.F.-X.; Eggeler, G.: Stress and strain states in a pseudoelastic wire subjected to bending rotation. Mechanics of Materials 38, 1012-1025 (2006)

[13]

Krone, L.; Mentz, J.; Bram, M.; Buchkremer, H.P.; Stöver, D.; Wagner, M.; Eggeler, G.; Christ, D.; Reese, S.; Bogdanski, D.; Köller, M.; Esenwein, S.A.; Muhr, G.; Prymak, O.; Epple, M.: The Potential of Powder Metallurgy for the Fabrication of Biomaterials on the Basis of Nickel-Titanium: A Case Study with a Staple Showing Shape Memory Behaviour. Advanced Engineering Materials 7, 613-619 (2005)

[12]

Richter, J.; Wagner, M.; Grönemeyer, D.; Eggeler, G.: Development and fatigue experiments of a novel nonlinear medical drilling device containing a flexible NiTi shaft. in: Proc. of SMST 2004, 131-136 (2004)

[11]

Wagner, M.; Frenzel, J.; Eggeler, G.: Evolution of microstructural parameters during cycling of NiTi and their effect on mechanical and thermal memory. in: Proc. of SMST 2004, 103-109 (2004)

[10]

Wagner, M.; Yu, J.-K.; Kausträter, G.; Eggeler, G.: Functional Fatigue of NiTi Shape Memory Coil Spring Actuators. in: Proc. of ACTUATOR 2004, 629-632 (2004)

[9]

Eggeler, G.; Hornbogen, E.; Yawny, A.; Heckmann, A.; Wagner, M.: Structural and functional fatigue of NiTi shape memory alloys. Materials Science and Engineering: A 378, 24-33 (2004)

[8]

Khalil-Allafi, J.; Hasse, B.; Klönne, M.; Wagner, M.; Pirling, T.; Predki, W.; Schmahl, W.W.: In-situ diffraction investigation of superelastic NiTi shape memory alloys under mechanical stress with neutrons and with synchrotron radiation. Materialwissenschaft und Werkstofftechnik 35, 280-283 (2004)

[7]

Khalil-Allafi, J.; Schmahl, W.W.; Wagner, M.; Sitepu, H.; Toebbens, D.M.; Eggeler, G.: The influence of temperature on lattice parameters of coexisting phases in NiTi shape memory alloys--a neutron diffraction study. Materials Science and Engineering A 378, 161-164 (2004)

[6]

Schmahl, W.W.; Khalil-Allafi, J.; Hasse, B.; Wagner, M.; Heckmann, A.; Somsen, C.: Investigation of the phase evolution in a super-elastic NiTi shape memory alloy (50.7 at.%Ni) under extensional load with synchrotron radiation. Materials Science and Engineering A 378, 81-85 (2004)

[5]

Wagner, M.; Richter, J.; Frenzel, J.; Grönemeyer, D.; Eggeler, G.: Design of a medical non-linear drilling device: The influence of twist and wear on the fatigue behaviour of NiTi wires subjected to bending rotation. Materialwissenschaft und Werkstofftechnik 35, 320-325 (2004)

[4]

Wagner, M.; Sawaguchi, T.; Kausträter, G.; Höffken, D.; Eggeler, G.: Structural fatigue of pseudoelastic NiTi shape memory wires. Materials Science and Engineering: A 378, 105-109 (2004)

[3]

Richter, J.; Bracke, A.; Wagner, M.; Eggeler, G.; Grönemeyer, D.: Metallographische Untersuchungen von NiTi-Wellen eines nicht-linearen Bohrsystems für den mikrotherapeutischen Einsatz. Sonderband Praktische Metallographie 35, 475-480 (2003)

[2]

Sawaguchi, T.A.; Kausträter, G.; Yawny, A.; Wagner, M.; Eggeler, G.: Crack initiation and propagation in 50.9 at. pct Ni-Ti pseudoelastic shape-memory wires in bending-rotation fatigue. Metallurgical and Materials Transactions A 34, 2847-2860 (2003)

[1]

Kausträter, G.; Yawny, A.; Wagner, M.; Skrotzki, B.; Eggeler, G.F.: Back Flow Creep Phenomena in Short Fibre Reinforced Aluminium Alloys. Materials Science Forum 396-402, 1303-1308 (2002)